Respeaker 2 HAT With Raspberry Pi

Respeaker HAT

This article is around Raspberry Pi and this Re speaker 2 Mics Pi HAT. ReSpeaker 2-Mics Pi HAT is a dual-microphone expansion board for Raspberry Pi designed for voice applications, like Amazon Alexa or Google Assistant. So if you are interested in playing around Alexa or assistant enabled applications with Raspberry Pi you can certainly try this out. We will set it up with Raspberry Pi and will check some demo applications. The board is developed around WM8960, a low power stereo codec. There are 2 microphones on both sides…

Read More

Access Watchdog Timer of Raspberry Pi using JAVA

This tutorial is all about using the watchdog timer of Raspberry Pi by using JAVA. For this, we are going to use Pi4J library. Watchdog Timer: “A watchdog timer (sometimes called a computer operating properly or COP timer, or simply a watchdog) is an electronic timer that is used to detect and recover from computer malfunctions. During normal operation, the computer regularly resets the watchdog timer to prevent it from elapsing, or “timing out”. If due to a hardware fault or program error, the computer fails to reset the watchdog, the timer will elapse and generate a timeout signal.…

Read More

OSMC on Raspberry PI with Setup and Control using Android App

osmc

A video about the installation of OSMC onto Raspberry Pi to make a complete media center for home entertainment. The video shows how to install OS as well as configuring it such that it can be accessed by Android App so that it can be controlled wirelessly. Check out the video for more details.

Read More

Measure Distance using Ultrasonic Sensor HC – SR04 | Pi4J | JAVA | Raspberry Pi

uLTRASONI pI

This is a simple tutorial showing how to interface HC – SR04  ultrasonic ranging module with Raspberry Pi to measure distance using JAVA. Ultrasonic ranging module HC – SR04 provides 2cm – 400cm non-contact measurement function, the ranging accuracy can reach to 3mm. The modules include ultrasonic transmitters, receiver and control circuit. The basic principle of work: (1) Using IO trigger for at least 10us high-level signal, (2) The Module automatically sends eight 40 kHz and detect whether there is a pulse signal back. (3) IF the signal back, through…

Read More